Clean and shield from dye transfer & abrasion damage | The only protection new leather (0-3 yrs) or leatherette needs
Pigmented (non porous) leather commonly found in cars, furniture and other leather items has a coloured protective finish. Modern leather finishes are high-tech - they are elastic, wear resistant and, very importantly, air and water vapour permeable. Most high quality vinyl or PU leather imitations are also coated with protective finishes. These finishes are protected with a clear coating called a ‘topcoat’ which carries waxes and additives that give the surface a soft touch, prevent scratches, wear, creaking and squeaking. The elastic finish must be protected for the surface to retain its new look,
soft touch and stay squeak free.
Why 3 Minus?
New leather has an optimum balance of moisture and oil. Protecting the topcoat is therefore the priority. During this time, applying a leather conditioner shows little or no benefit.
For the 3 first years: use Geist. Dye & Friction Blocker to protect against dye transfer and friction damage after cleaning.
What is it for?
- Suitable for leather, vinyl, artificial leather, vegan leather, fake/faux leather or pleather. Works for all leather colours. Not suitable for absorbent leather like aniline, suede or nubuck.
- Clean with Rapid Cleaner.
- Protect with Dye & Friction Blocker.
Directions
- STEP 1: For regular cleaning, spray the product onto a cloth and wipe the surface, or spray Rapid Cleaner on to a sponge to create foam, and work on to the surface from seam to seam allowing it to lift the soiling from the pores for about 2-3 minutes. Wipe off with a lint free cloth. If needed, leave on difficult stains for longer. For deeper cleaning, scrub gently with the brush included and wipe off using a lint free cloth or microfibre towel away from sunlight and heat. Extreme stains on vinyl and on colour-fast leather can be treated with the cleaner and left for longer periods, several hours if needed, before working gently with the cleaning brush. Always test in a hidden area for colour loss before cleaning. Poorly or old recoloured leather/vinyl paints can rub off when wet cleaned.
- STEP 2: Spray Dye & Friction Blocker onto a clean lint free cloth and wipe evenly .Allow to dry. For maximum protection, apply after every cleaning treatment or once every 3 months.
